[ ANAND ENGINEERS ] MOLYGRAPH - Speciality Lubricants & Maintenance Aerosols...Mumbai, India
 
 
[ ANAND ENGINEERS ] MOLYGRAPH - Speciality Lubricants & Maintenance Aerosols...Mumbai, India Speciality Lubricants - Gear Oils / Gear Oil Add
 
 
 
[ ANAND ENGINEERS ] MOLYGRAPH - Speciality Lubricants & Maintenance Aerosols...Mumbai, India [ ANAND ENGINEERS ] MOLYGRAPH - Speciality Lubricants & Maintenance Aerosols...Mumbai, India
[ ANAND ENGINEERS ] MOLYGRAPH - Speciality Lubricants & Maintenance Aerosols...Mumbai, India
- ULTRA GEAR SYN SERIES
 
DESCRIPTION  
High Performance Hydro Carbon Base Synthetic Gear and Bearing Lubricant
 
BENEFITS
  • Formulated from Synthetic Hydro Carbon (PAO) base stock
  • High load carrying capacity, anti-wear and EP properties
  • Thermal and oxidation resistant at high temperatures
  • High viscosity index ensures adequate film thickness at elevated temperatures
  • Reduce friction in various mechanical operations, good potential in reducing power consumption
  • Chosen additives provide excellent rust and corrosion protection
  • Good water demulsibility, air trapment release and foam control
  • Minimize sludge and deposits extending filter life and ensuring trouble free operation
  • Long oil change intervals. Reduced downtime and thereby reduced operating costs
  • Blended from 100% imported raw materials
APPLICATIONS  
  • A long life lubricant for gear boxes
  • Low temperature gear boxes where smooth start-up is desired
  • Mixer bearings and roll neck bearings operating at high temperatures
  • Machines such as marine and other centrifuges, oil flooded rotary screw compressors used in onshore and offshore oil and natural gas industry
  • In textile industry for use such as in Staubli’s dobby for Sulzer, Piccanol air jet weaving looms
  • As a long life lubricant for high ratio worm gear boxes
Characteristics
Test Method
Unit
ULTRA GEAR SYN SERIES
150 220 320 460 680
Base - - PAO PAO PAO PAO PAO
Base Oil Viscosity @40°C [typ.] * ASTM  D-445 cSt 157 244 315 455 675
Base Oil Viscosity
@ 100°C		 ASTM  D-445 cSt 18 25 29 44 67
Viscosity Index ASTM D-2270 - 123 128 123 151 150
Flash Point [min.] ASTM D-92 °C 245 255 240 245 240
 
* Base Oil Viscosities indicated are typical.  The range is + 10% of the nominal viscosity.

Note : Ultra Gear Syn Series are fully compatible with mineral oil. For best performance it is recommended that systems be thoroughly flushed before changing over to these oils.
 
*CTM = Corporate Test Method
Packing :  5 / 20 Litres
MSDS available on request
[ ANAND ENGINEERS ] MOLYGRAPH - Speciality Lubricants & Maintenance Aerosols...Mumbai, India [ ANAND ENGINEERS ] MOLYGRAPH - Speciality Lubricants & Maintenance Aerosols...Mumbai, India
 
     
  © Anand Engineers 2009 Design: Digital Destinations