Animal Feed Manufacturer Solves Grease Pumpability Issue on Critical Bearings of Pellet Mills with Molygraph’s SGH 220 Plus 2/1 Grease
One of India’s leading manufacturers of animal feed was facing grease pumpability issues on critical bearings of pellet mills leading to under/ over greasing of bearings.
A sponge iron plant in eastern India was spending heavily on greasing critical support bearings on the kilns. But still faced premature failure of bearings leading to high repair costs and unplanned shutdowns. Molygraph’s application experts recommended SG 1000 M 50
Bearings in the Wet End, Dry End, and Calendering section of the Paper Mill are subjected to water ingress, steam, chemicals, and heavy loads. A leading Paper manufacturer in Western India was facing the mill grease performance issue.
A sponge iron plant in Eastern India was spending heavily on the greasing of Kiln girth gear. Still, it was facing issues like higher consumption, sludge formation in the teeth, less coverage area blocking of nozzles, and wear of the gears.
Sometimes, the best way to improve the customer experience is just to watch and learn.
A major coil manufacturer wanted to standardize one lubricant for both fin forming and copper tube bending. The fin stamping was light duty with…
An ordinary general purpose grease used by the customer resulted in frequent re-greasing and bearing failure. Molygraph’s application experts studied the process and recommended Molygraph’s specialty grease SG 1000 M50.
A valve maintenance company based in Malaysia required a valve sealant. The Malaysian distributor for Molygraph suggested VLG 620 to replace the current product...
A major wheels forming manufacturer was using an oil based forming lubricant for aluminum wheel forming. Oil based lubricants have inherent problems...
A major wheels manufacturer in India was looking at a cost effective solution for their lubrication requirements in their wheel forming process.
An aluminum food container manufacturer was using IPA mixed with oil for stamping aluminum food containers. They were facing multiple issue…
Bearings in cold rolling mills are subjected to harsh environmental conditions. Heavy loads, high temperature and dust and water ingress…
Pellet mills in the animal feed industry operate in very harsh conditions. Line choking and grease blockage are common phenomena during lubrication of the pellet mills. This in turn results in inadequate lubrication and leads to bearing failure.
Sign in using your email address
Stay signed in
